As long as the feed air is of sufficient quality, the COMPAIR PSA Oxygen & Nitrogen gas generators do not need any renewal of the molecular sieve, thanks to best quality molecular sieves used for all our PSA generators.
We strongly believe COMPAIR PSA systems are and can help you save money on your oxygen/nitrogen gas costs and allow you to produce gas on-site. Simple and cost effective from a supply of compressed air, it helps you avoid rental charges, transportation expenses, labour costs, and evaporation losses of bulk systems.
No, with COMPAIR PSA systems you will produce gas when you need and no need to store cylinders like LOX cylinders where up to 5 % of tank volume gas is evaporated
COMPAIR Generator will produce the required oxygen/nitrogen 24x7x365 days for years when called for. High reliability through fewer moving parts and high-quality components. You will get controlled flow, right quality and uninterrupted gas.
Our generators require about 0.1 kW at 110 or 220 Volts, 50 or 60 Hz, 1 Phase.
Compressors with an integrated air dryer can be used only if the ambient air temperature at the installation site does not exceed 25 °C.
First of all oil free compressors are extremely expensive compared to oil lubricated ones and not at all required for COMPAIR PSA systems as long as the feed air quality recommended by us is maintained.
The PSA columns of all our generators are thoroughly calculated and tested for fatigue cracking. COMPAIR Oxygen & Nitrogen gas Generators have low operating pressures, no safety risks of handling of high-pressure gas cylinders.
The COMPAIR generators have a higher separation efficiency than any other PSA system in the market with reduced feed air requirements resulting into lower energy requirement
Quality assurance is an integral part of COMPAIR’s operations and it is our priority to always deliver high quality products and services. COMPAIR holds all relevant approvals for serving numerous applications. Please contact us for our certificate pack.
Medical oxygen is considered as drug and it is sensitive to quality. Keeping this in mind COMPAIR add the coal tower in its systems for hospital use which provide an extra filtration and even removes any odor or any other contamination.
Our systems are suitable for both indoor and outdoor installation. If you place the unit outdoors, rain protection is a must! If you place it inside, you need proper air circulation for compressor cooling and air intake and exhaust for both, compressor and PSA generator. There is no special floor requirement.
Medical Oxygen Purity Requirements according to U.S. Pharmacopeia and European Pharmacopeia is 93 ± 3%, according to British Pharmacopeia it is 94 %. COMPAIR’s MEDOX Series PSA oxygen generators meet these requirements for use in medical application. Liquid oxygen (LOX) at 99% oxygen purity may have some advantages for metal cutting, but not necessarily for medical applications. Some local authorities require 99% purity oxygen due to old regulations and ordinances. However, with the acceptance of international specifications from CSA (Canada) and ISO 10083 (European) these older specifications are being revised to 93%. There have been powerful competitive interests that have lobbied local authorities to maintain a 99% medical oxygen purity standard to prevent the introduction of less expensive alternatives like PSA oxygen generators.